Product Description
High Performance Pulley for Belt Conveyors
BRIEF INTRODUCTION
Our company has adopted proprietary technology and equipment imported from German PWH company for the design and manufacturing of various pulleys . As a key component of the conveyor, the pulley should have high reliability. Our company’s R&D center has improved the pulley structure, reduced structural stress, and increased the lifespan and reliability of the pulley group through finite element analysis and optimization calculations. Our company’s pulley is manufactured from specialized high-end manufacturing equipment and has achieved serialized and large-scale production.
We have produced conveyor pulleys for belt width up to 2.4 m, pulley diameter up to 1.8 m, and maximum tension up to 300 tons.
PRODUCT INFORMAITON
| Product Name | Pulley |
| Adhesive Material | smooth, ordinary rubber, wear-resistant rubber, UHMW-PE, rubber ceramic, etc.. |
| Adehensive Treatment | glued or casted |
| Carrying Capacity | light, medium and heavy type |
| Connection Mode | Shafts and wheels of the medium and heavy-duty pulley are connected by expansion sleeves. |
| Pulley Pipe | made of Q235B carbon steel, with high roundness and straightness ensuring rotation balance |
| Shaft | 45 # round steel or according to your requirements; ultrasonic inspection, quenching and tempering treatment, strict control of key fit size tolerances, greatly extending service life. |
| Bearing Brands | Havalo, SKF, FAG, SNK or according to your requirements |
| Bear Seat | Integral bearing seat, partial bearing seat |
| Color | bright red paint or according to your requirements |
VARIOUS TYPES OF PULLEY ADHESIVE SURFACE
BEARING SEAT MODE
TECHNICAL SPECIFICATIONS & PARAMETERS
| Technical Parameters for Belt Conveyor Pulley | ||||||
| Belt Width (mm) | Pulley Standard Diameter without Adhesive Layer(mm) | |||||
| 650 | 200,250,320,400,500,630 | |||||
| 800 | 200,250,320,400,500,630,800,1000,1250 | |||||
| 1000 | 250,320,400,500,630,800,1000,1250,1400,1600 | |||||
| 1200 | 250,320,400,500,630,800,1000,1250,1400,1600 | |||||
| 1400 | 320,400,500,630,800,1000,1250,1400,1600 | |||||
| 1600 | 400,500,630,800,1000,1250,1400,1600 | |||||
| 1800 | 250,400,500,630,800,1000,1250,1400,1600 | |||||
| 2000 | 400,500,630,800,1000,1250,1400,1600 | |||||
| Technical Parameters | ||
| 1 | Outer Circle Diameter D Deviation | 200 ≤ 1.5 400 ≤ 2.0 1000 ≤ 2.5 |
| 2 | Radial Runout of Outer Circle | D ≤ 200 ; without adhesive 0.3 ;with adhesive 0.5 200 < D ≤ 800 ; without adhesive 0.6; with adhesive 1.1 800 < D ≤ 1600 ; without adhesive 1.0; with adhesive 1.5 1600 < D ≤ 1800 ; without adhesive 1.5; with adhesive 2.0 |
| 3 | Static Balance Accuracy | G40 |
PROCESS FLOW OF PULLEY
Our company is equipped with necessary equipment for processing pulleys, such as large oil pressure machines, rolling machines, specialized pulley automatic explosive welding operators, large diameter lathes, boring machines, ultrasonic flaw detectors, static balancing devices, pressure casting machines, etc. Due to the special correction process adopted by the company, the pulley pipe skin is rounded before processing, and the pulley pipe wall is uniform after processing, thereby ensuring that the pulley has high static balance performance and high mechanical performance.
PRODUCT FEATURES
For pulleys with complex forces, large loads and used in heavy working conditions, they all adopt a cast welded structure and expansion sleeve connection. Compared with traditional drums in China, this type of drum mainly has the following characteristics :
(1) The structural parameters of the pulley are advanced and reasonable, and there is a dedicated computer calculation program to determine the shaft diameter, cylinder skin thickness, wheel amplitude plate shape and spacing, as well as the position of the circumferential weld seam set at the position where the stress is minimum and the number of cycles is minimum.
(2) The key technology of using single sided welding and double sided forming ensures the quality of the weld seam.
(3) The expansion sleeve connection is used between the drum hub and shaft, which not only solves the problem of key connection stress concentration that has been existing for many years and the technical difficulties of manufacturing and installing axial double keyways, but also achieves overall quenching and eliminates welding internal stress.
(4) The circumferential and longitudinal welds of the pulley have undergone non-destructive testing, and the casting quality of the wheel hub has undergone magnetic particle or ultrasonic testing.
(5) The total radial runout of the outer circle after roller casting is less than 1mm.
(6) All drums undergo static balance tests before leaving the factory to achieve G40 accuracy.
(7) All driving pulley and directional pulley with high stress have undergone finite element analysis to ensure that the stress and strain of the rollers meet the requirements.
Due to a series of measures taken, the pulley group produced by SK has a reasonable structure, large bearing capacity, and reliable performance. And it overcomes the problem of fatigue fracture at the welding seam of the existing pulley plate in China. The pullley (including the welding part) is guaranteed to have a rotational fatigue strength of over 108°.
WORKSHOP OF FINISHED PULLEIES
PACKAGE AND DELIVEYR
APPLICATION INDUSTRIES
CONVEYORS EPC/BOT CONTRACTING CAPABILITY
VARIOUS CONVEYOR SPARE PARTS SUPPLY
AERIAL VIEW OF OUR FACTORY
INTELLIGENT PRODUCTION & TESTING
CERTIFICATES & HORNORS
BRANCHES & OFFICES
TEAM BUILDING
LONG-TERM STRATEGIC COOPEATORS
MAIN CUSTOMERS
CUSTOMERS VISITS
DOMESTIC & OVERSEAS EXHIBITIONS
SINGING CEREMONY
GLOBAL BUSINESS NETWORK
B /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | CE, ISO |
|---|---|
| Pulley Sizes: | Kk |
| Manufacturing Process: | Forging, Casting |
| Material: | Carbon Steel |
| Surface Treatment: | Smooth, Rubber or Ceramics |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant, Port, Dock, Energy, Cement, Metallurgy, Steel |
| Samples: |
US$ 7/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do drive pulleys impact the performance of mining and quarrying equipment?
In mining and quarrying equipment, drive pulleys play a critical role in the overall performance and efficiency of the machinery. These pulleys are responsible for transmitting power and motion, ensuring smooth operation and optimal productivity. Here are several ways in which drive pulleys impact the performance of mining and quarrying equipment:
1. Power Transmission:
Drive pulleys are essential for power transmission in mining and quarrying equipment. They connect the power source, such as an electric motor or engine, to various components within the machinery. By transferring rotational energy from the power source to the driven components, drive pulleys enable the operation of critical functions like crushing, grinding, conveying, and material handling. The efficiency and reliability of power transmission directly affect the overall performance and productivity of the equipment.
2. Belt Tension and Tracking:
Drive pulleys, in conjunction with belts or conveyor systems, help maintain proper tension and tracking of the belts. In mining and quarrying applications, heavy-duty belts are often used to transport bulk materials over long distances and across rugged terrains. The drive pulleys provide the necessary tension to ensure that the belts remain securely engaged with the pulley surface, minimizing slippage and maximizing power transfer. Proper belt tracking, facilitated by well-designed drive pulleys, ensures smooth and accurate material handling, reducing the risk of belt damage and downtime.
3. Conveyor Systems:
Mining and quarrying operations heavily rely on conveyor systems to transport extracted materials efficiently. Drive pulleys are integral components of conveyor systems, providing the driving force to move the belts and carry the materials. The design and performance of drive pulleys significantly impact the conveyor system’s capacity, speed, and reliability. Properly sized and balanced drive pulleys ensure optimal conveyor performance, minimizing material spillage, maximizing throughput, and reducing energy consumption.
4. Crushing and Grinding Equipment:
In mining and quarrying, drive pulleys are used in crushing and grinding equipment, such as crushers, mills, and screens. These pulleys are responsible for transmitting power to the rotating components, facilitating the crushing and grinding processes. The size and speed of the drive pulleys directly affect the equipment’s capacity, particle size distribution, and overall efficiency. Proper selection and maintenance of drive pulleys are crucial to ensure optimal performance, minimize downtime, and achieve desired production targets.
5. Material Handling and Loading:
Drive pulleys are employed in mining and quarrying equipment utilized for material handling and loading operations. This includes equipment like loaders, excavators, and haul trucks. Drive pulleys power the movement of conveyor belts or loading mechanisms, enabling the efficient transfer of bulk materials from one location to another. Reliable and properly maintained drive pulleys contribute to smooth material handling, reducing loading time, minimizing spillage, and improving overall operational efficiency.
6. Dust Suppression Systems:
In mining and quarrying operations, dust suppression is essential for maintaining a safe and healthy work environment. Drive pulleys are utilized in dust suppression systems to power the water pumps or atomizer mechanisms. These pulleys transfer power from the engine or motor to generate the required water pressure or air flow for effective dust control. Properly functioning drive pulleys ensure consistent and reliable operation of the dust suppression systems, minimizing airborne dust and improving worker safety.
7. Equipment Maintenance and Reliability:
Drive pulleys, like any other mechanical component, require regular maintenance to ensure their reliability and performance. Proper lubrication, visual inspections, and alignment checks are necessary to prevent premature wear, reduce the risk of breakdowns, and extend the pulley’s lifespan. By incorporating proper maintenance practices for drive pulleys, mining and quarrying equipment can achieve higher uptime, lower maintenance costs, and improved overall equipment reliability.
8. Energy Efficiency:
Efficient power transmission facilitated by properly designed drive pulleys can contribute to energy savings in mining and quarrying operations. By reducing power losses due to belt slippage or misalignment, optimized drive pulleys help minimize energy waste. Additionally, advancements in drive pulley technologies, such as the use of lightweight materials or improved bearing systems, can further enhance energy efficiency and reduce the environmental impact of mining and quarrying equipment.
Can drive pulleys be customized for specific machinery and equipment?
Yes, drive pulleys can be customized to meet the specific requirements of machinery and equipment. Customization allows for the design and manufacturing of drive pulleys that are tailored to suit the unique needs of a particular application. Here are the key aspects of customizing drive pulleys for specific machinery and equipment:
1. Size and Dimension:
Custom drive pulleys can be manufactured in different sizes and dimensions to match the space constraints and installation requirements of the machinery or equipment. The diameter, width, and overall dimensions of the pulley can be adjusted to ensure proper fit and compatibility with the system. Custom sizing ensures that the drive pulley integrates seamlessly into the equipment without any interference or clearance issues.
2. Groove Profile:
The groove profile of the drive pulley is crucial for proper engagement with the belt or chain. Custom drive pulleys can be designed with specific groove profiles to accommodate various belt or chain types, including V-belts, flat belts, round belts, or timing belts. The groove dimensions, angles, and shapes can be customized to ensure optimal belt or chain tracking, reducing the risk of slippage and enhancing power transmission efficiency.
3. Material Selection:
Drive pulleys can be customized with different materials based on the specific requirements of the machinery or equipment. The material selection depends on factors such as load capacity, environmental conditions, and system dynamics. Common materials used for drive pulleys include steel, aluminum, cast iron, or engineered plastics. Customization allows for choosing the most suitable material that offers the desired strength, durability, and corrosion resistance for the application.
4. Shaft Configuration:
Custom drive pulleys can be designed to accommodate specific shaft configurations of the machinery or equipment. The pulley can be manufactured with a keyed bore, tapered bore, or other customized shaft attachment mechanisms to ensure a secure and precise connection. The shaft configuration customization ensures proper alignment and eliminates any potential for slippage or misalignment during operation.
5. Special Features:
Custom drive pulleys can incorporate special features or modifications to meet specific functional requirements. These features can include additional mounting holes, keyways, set screws, or other provisions for auxiliary devices or sensors. Special features can also be added to enhance the performance or functionality of the pulley, such as dynamic balancing for high-speed applications or noise reduction measures.
6. Coatings or Surface Treatments:
Depending on the application and operating conditions, custom drive pulleys can be coated or treated with specialized surface treatments. Coatings such as zinc plating, nickel plating, or powder coating can provide corrosion resistance and improve the aesthetic appearance of the pulley. Surface treatments like heat treatment or hardening can enhance the pulley’s durability, wear resistance, and load-carrying capacity.
7. Performance Optimization:
Custom drive pulleys can be designed and optimized to maximize the performance of the machinery or equipment. Factors such as speed, torque, power requirements, and system dynamics can be taken into account during the customization process. By carefully considering these factors, the drive pulley can be tailored to achieve optimal power transmission efficiency, minimize energy losses, and enhance overall system performance.
In summary, drive pulleys can be customized to suit the specific machinery and equipment requirements. Customization allows for adjusting the size, dimension, groove profile, material selection, shaft configuration, and incorporating special features or coatings. By customizing drive pulleys, manufacturers can ensure seamless integration, optimal performance, and reliable operation in various industrial applications.
In which industries and applications are drive pulleys commonly used?
Drive pulleys are widely used in various industries and applications where power transmission and motion control are essential. Their versatility and effectiveness make them a fundamental component in numerous mechanical systems. Here are some of the industries and applications where drive pulleys are commonly employed:
1. Manufacturing and Industrial Machinery:
Drive pulleys play a crucial role in manufacturing and industrial machinery. They are used in conveyor systems to transport materials or products along production lines. Drive pulleys enable the movement of items such as bulk goods, packages, and components in industries including automotive, food processing, mining, and logistics. Additionally, drive pulleys are found in various types of machinery, such as pumps, compressors, and generators, where they facilitate power transmission and rotational motion.
2. Agricultural Equipment:
In the agricultural sector, drive pulleys are employed in a range of equipment. They are used in farming machinery, including tractors, combines, and harvesters, to transmit power and control the operation of components such as belts, chains, and augers. Drive pulleys are vital in applications such as grain handling, irrigation systems, and equipment used for planting, harvesting, and processing crops.
3. Construction and Mining:
Drive pulleys are extensively utilized in the construction and mining industries. They are employed in heavy machinery, including cranes, excavators, loaders, and conveyor systems, to facilitate the movement of materials, such as soil, rocks, and ores. Drive pulleys are essential for the operation of equipment involved in earthmoving, material handling, and mineral extraction processes.
4. Material Handling and Warehousing:
In material handling and warehousing applications, drive pulleys are indispensable. They are used in conveyor systems to transport goods, packages, and materials within warehouses, distribution centers, airports, and shipping facilities. Drive pulleys enable the efficient movement of products along assembly lines, sorting systems, and storage areas, ensuring smooth and continuous workflow.
5. Automotive and Transportation:
Drive pulleys find widespread use in the automotive and transportation industries. They are employed in vehicles, including cars, trucks, buses, and trains, to transmit power from engines to various components such as water pumps, alternators, and air conditioning compressors. Drive pulleys also play a role in belt-driven systems, such as power steering and supercharging systems, enhancing vehicle performance.
6. Renewable Energy:
In the field of renewable energy, drive pulleys are utilized in wind turbines and solar tracking systems. Drive pulleys help convert wind or solar energy into rotational motion, driving generators or tracking mechanisms to maximize energy capture. They are critical components that enable efficient power generation in wind farms and solar power plants.
7. Exercise and Fitness Equipment:
Drive pulleys are commonly found in exercise and fitness equipment, such as treadmills, stationary bikes, and weight machines. They facilitate the transfer of power and motion from motors or users to various components, such as belts, flywheels, and resistance systems. Drive pulleys ensure smooth and controlled movement, allowing users to engage in effective workouts.
8. Marine and Shipbuilding:
In the marine industry and shipbuilding sector, drive pulleys are utilized in propulsion systems, winches, cranes, and cargo handling equipment. They play a vital role in transmitting power and controlling the movement of various components, enabling the operation of vessels, offshore platforms, and port facilities.
These are just a few examples of the industries and applications where drive pulleys are commonly used. Their versatility and importance in power transmission and motion control make them indispensable components in a wide range of mechanical systems across different sectors.
editor by CX
2024-05-10